Plot - Rotary
This page will only be available if the Rotary output option has been selected in the Plotter machine options.
Enter the diameter of the inside of the rotary shell.
Enter the height of the rule above the wood.
Enter the depth of the rule that enters the board.
Enter the thickness of the rotary shell.
From the pulldown list select Bosch radius, Scale factor, Marba method, User defined or From rotary dieboard tool.
This is only available if User defined has been selected above. In this case, enter the required Effective radius of the shell, otherwise the calculated Effective radius will be displayed here.
The intermediate value used to calculate the result is displayed here.